The case is now ready for usage.
To disassemble for transporting simply disconnect the hood and fold
flat. The folded hood can now be held into place on the lid of the
bag. Release the two feet and close all zippers.
Clear TPU panel allows viewing and adjusting of frontal monitor 1.
controls.
Gain quick full access to the front controls of the monitor when 2.
assembled by simply unzipping the main zipper and flipping up
the hood.
Adjustable feet for changing angle of monitor screen3.
Zippered bottom opening for connecting case to stand or running 4.
cables out of the bottom of case.
Extended fold-out hood for blocking out sunlight.fExtended fold-5.
out hood for blocking out sunlight.
After straps are connected, flip case over and 8.
connect the two yellow feet.
Release flap located on lid which contains the 9.
screen hood.
Secure each side of the hood with flap located 10.
on each side of case.
q
w
e
r
t
DEVELOPMENT AND PRODUCTION by KATA .
P.O.B 45078 Jerusalem, 91450 Israel
Tel: 972-2-5911000 Fax: 972-2-5400504
e-mail: videophoto@kata-bags.com or
technical@kata-bags.com
Extend your warranty
Five Year Warranty: Kata warrants each product to be free of defects in material and
workmanship for a period of 5 years from the date of purchase.
Lifetime Warranty Extension:
By registering your product online with kata, for a limited period we offer lifetime
service.
For free extended warranty please visit
our web site and register your product:
www.kata-bags.com
PK030708Made in Israel
To Previous Page
Loading...