Page
50
6
FUNCTION SETTINGS
1) BRILLIANCE
This function allows the brightness of the ES6 digital piano sound to be adjusted.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the PIANO1 button.
The LED indicators for the TOUCH, TRANSPOSE, and PIANO1 buttons will start to fl ash, indicating that the
Brilliance function has been selected.
The name of the function ‘bri’ (Brilliance) and the current settings will be shown in the LED display.
Step 2
Press the
T
or
S
VALUE/BALANCE buttons to increase or decrease the Brilliance level to the desired
value.
The Brilliance value can be set within the range of -10 to +10.
Positive values produce a brighter tone, while negative values produce a more mellowed tone.
Step 3
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
Brilliance setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and PIANO1 buttons will stop fl ashing.
Any changes made to the Brilliance setting will remain until the power is turned off.
When the power is turned off, the Brilliance setting will return to the default value of ‘0’, however it is possible to use
the Memory Backup function to store the preferred Brilliance value. Please refer to the instructions on page 62 for
more information.
BRILLIANCE
2
Press and hold both buttons
1
Press the PIANO1 button
To Next Page
Loading...
Need help?
General
