Page
67
6
FUNCTION SETTINGS
16) LOCAL CONTROL ON/OFF
This function determines whether the ES6 digital piano will play a sound when the keyboard is played, or only
when a message is received from an external MIDI instrument.
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the E.PIANO button twice.
The LED indicators for the TOUCH, TRANSPOSE, and E.PIANO buttons will start to fl ash, indicating that the
Local Control On/Off function has been selected.
The name of the function ‘LcL’ (Local) and the current settings will be shown in the LED display.
Step 2
Press the
T
or
S
VALUE/BALANCE buttons to select the desired Local Control setting.
When set to ‘On’, the ES6 digital piano will play a sound when the keyboard is played.
With set to ‘Off’, the ES6 digital piano will not play a sound when the keyboard is played, yet will continue to
transmit data on the selected MIDI channel to an external MIDI device.
Step 3
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
Local Control On/Off setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and E.PIANO buttons will stop fl ashing.
Any changes made to the Local Control On/Off setting will remain until the power is turned off.
When the power is turned off, the Local Control On/Off setting will return to the default value of ‘On’, however it is
possible to use the Memory Backup function to store the preferred Local Control On/Off setting. Please refer to the
instructions on page 62 for more information.
LOCAL CONTROL
Off On
Press the E.PIANO button twice Press and hold both buttons
2
1
To Next Page
Loading...
Need help?
General
