Need help?Do you have a question about the Kawasaki VERSYS 1000 and is the answer not in the manual?
General| Engine Type | Liquid-cooled, 4-stroke In-Line Four |
|---|---|
| Displacement | 1, 043 cc |
| Bore x Stroke | 77.0 x 56.0 mm |
| Compression Ratio | 10.3:1 |
| Ignition | Digital |
| Front Tire | 120/70ZR17M/C (58W) |
| Rear Tire | 180/55ZR17M/C (73W) |
| Wheelbase | 1, 520 mm |
| Ground Clearance | 150 mm |
| Seat Height | 840 mm |
| Starting System | Electric |
| Lubrication | Forced lubrication, wet sump |
| Clutch | Wet multi-disc, manual |
| Transmission | 6-speed, return |
| Final Drive | Chain |
| Front Suspension | 43 mm inverted fork with stepless rebound damping and adjustable preload |
| Rear Suspension | Horizontal back-link with stepless rebound damping and adjustable preload |
| Front Brakes | Dual semi-floating 310 mm petal discs, dual radial-mount 4-piston calipers |
| Rear Brakes | Single 250 mm petal disc, single-piston caliper |
| Fuel Capacity | 21 L |
| Maximum Power | 88.3 kW (120 PS) / 9, 000 rpm |
| Maximum Torque | 102 Nm (10.4 kgf·m) / 7, 500 rpm |
Provides foundational information about the motorcycle, including servicing precautions and specifications.
Outlines scheduled maintenance tasks, charts, torque specifications, and general procedures.
Details the digital fuel injection system, including components, specifications, and troubleshooting.
Covers disassembly, inspection, and installation of engine top-end components like cylinder head and valves.
Procedures for clutch removal, installation, adjustment, and inspection of plates and springs.
Details the engine lubrication system, including oil changes, filter replacement, and pump service.
Step-by-step guide for safely removing and installing the engine from the motorcycle.
Covers crankshaft, connecting rods, and transmission shaft servicing procedures.
Procedures for wheel, tire, and hub bearing maintenance, including balancing and inspection.
Procedures for drive chain, sprockets, and coupling maintenance and replacement.
Comprehensive guide to brake system service, including levers, calipers, pads, discs, and ABS.
Procedures for servicing front forks, rear shock absorbers, swingarms, and steering.
Procedures for removing and installing fairings, seats, fenders, frame components, and sidestand.
Detailed information on all electrical systems, including battery, charging, ignition, and lighting.
Contains supplementary information like cable routing diagrams and troubleshooting guides.
To Next Page