1. The picture on the left shows the tools required
for unpacking & assembling the eA110.
① Ft lbs. torque wrench
②
Socket extension
③
6mm hex wrench
④
12mm socket
⑤
8mm wrench
⑥
10mm-12mm wrench
⑦
12mm-14mm wrench
⑧
8mm T-wrench (or socket)
⑨
Needle nose pliers
2. Remove straps and cardboard cover.
3. Remove hardware box and components from
crate.
4. Picture shows contents of packaged
components。
5. Contents of hardware inside packaged box.
Hardware chart on next page.
To Next Page
Loading...
