Display Features
͵ǡΪȋȌǦȋȌǤȀǤ
Press and hold the "M" button on the handlebar controls to turn on the display. Now, your e-bike is ready to ride. To turn it off, press and hold
the “M” button for 3 seconds.
Press the UP button for 3 seconds to turn on the light.
The display pad provides you with a variety of displays to meet the demand of your riding. The display contents are:
1. Operating Current to the Controller:
ʹǤ
2. Unit of Measure:
You can toggle between miles or kilometers based on your location and preference.
3. Speed Indicator:
It shows the real-time speed of your e-bike.
4. Battery Level Indicator:
Ǥϐ
remind you when the power is too low.
5. Pedal Assist Level:
1). AUTO: Press and hold the DOWN button for 1.5 seconds to light up the 6KM icon.
ʹȌǤǣͲǦͷǤ
6. Riding Information (Press “M” button to display items as follows):
1). 6KM Work: ʹǤ
ʹȌǤǣʹǤ
3). Error: Displays the current error code.
4). Odometer: The total mileage will be displayed.
5). Trip Odometer: It displays the mileage information of a single riding.
6). Riding Time: It displays the time information of a single riding.
7). Max Speed: It shows the real-time speed that is the maximum speed.
10
To Next Page
Loading...