Safety Checklist
Chain
Cranks and Pedals
Derailleurs
Motor Drive Assembly
and Throttle
Battery Pack
Safety Check Basic Steps
· Ensure pedals are securely tightened to the cranks.
· Ensure the cranks are securely tightened and are not bent.
· Ensure the chain is oiled, clean and runs smoothly.
· Extra care is required in wet or dusty conditions.
· Check that the derailleur(s) are adjusted and functioning properly.
· Ensure shift and brake levers are attached to the handlebar securely.
· Ensure all brake and shift cables are properly lubricated.
· Ensure the hub motor is spinning smoothly and the motor bearings are in good working order.
· Ensure all power cables running to the hub motor are secured and undamaged.
· Make sure the hub motor axle bolts are secured and all torque arms and torque washers are in place.
· Ensure battery is charged before use.
· Ensure there is no damage to the battery pack.
· Lock battery to frame and check to see that it is secured.
5
To Next Page
Loading...