Handheld Terminal KeTop - Specific Operating Instructions
User's Manual, version: 3.1 / material no.: 57448 103
© KEBA 2006
Checking the Operating and Control Elements
For checking the functionality of the operating and control elements of the
KeTop, the KeTop provides the software „Systemcheck“. This software is
contained in the start menu and can be operated intuitively. It is called as
follows:
Start -> Programs -> KeTop -> „System Check“
Provided they are exist on the device, the following operating and control
elements can be checked:
z Override potentiometer
z Electronic handwheel
z Joystick
z Status LEDs
z Membrane keyboard
z Touch screen
z Display
z Illuminated push button
z Key switch
z Selector switch
z PC card interface (slot), if existing.
The following control elements CANNOT be checked since their internal
evaluation via the electronics is not provided:
z Emergency stop switch
z Enabling switches
To Next Page
Loading...