Keba KeTop T100 - Hardware

Handheld Terminal Brief Description
User's Manual, version: 3.1 / material no.: 57448 9
© KEBA 2006
Construction
1
2
3
4a
6
7
8
5
7
5
10
9
14
15
12
11
13
4b
1 ................... override potentiometer (option)
2 ................... electronic handwheel or joystick (option)
3 ................... emergency stop switch (twin circuit) or stop switch
(option)
4a ................. 2 status LEDs (standard)
4b ................. further status LEDs (option)
5 ................... membrane keypad with tactile feedback
6 ................... color STN LC display with touch screen:
7.7" VGA resolution 640 x 480 or
8.4" SVGA resolution 800 x 600 (option)
7 ................... 2 locations for (option):
illuminated push-button, momentary 0
illumniated push-button, momentary I
illuminated push-button, maintaining I/0
8 ................... 1 location for (option):
illuminated push-button, momentary 0
illuminated push-button, momentary I
illuminated push-button, maintaining I/0
3-position key switch I-0-II / 0-I-II
3-position selector switch I-0-II / 0-I-II
9 .....................two 3-position enabling switches (left and right),
twin circuit
10 ...................multigrip handle
11 ...................PC card cover
12 ...................strain relief for connection cable (delivered with
the cable)
13 ...................cable entrance area
14 ...................blind plug for cable outlet not used
(to meet protection degree IP54)
NOTICE: All optional operating elements are described in the chapter „Options" on page 107.
Construction of KeTop T100