CE Conformity, Directives and Standards KeTop T100
150 User's Manual, version: 3.1 / material no.: 57448
© KEBA 2006
List of the appropriate EC directives and applied standards
EC directives
98/37/EC Directive for the safety of machinery with the application 98/79/EC
89/336/EC EMC directives with the changes 91/263/EWG and 93/31/EWG
Standards
For examination the conformity of the KeTop regarding the directives the
following legally not bounded european standards has been used:
Examination of the conformity regarding the directive of machinery
EN 418:1992
Safety of machinery - emergency stop equipment, functional aspects,
principles for design
EN 954-1:1996 Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
EN 60204-1:1997,
chap.9, 10
Electrical equipment of machines, general requirements
Examination of the conformity regarding the directive of EMC
EN 61131-2:2003
chap. 7, 8
Programmable Controllers
Part 2: Equipment requirements and test
So the accordance to following standards is also given:
EN 61000-6-2:2001
Electromagnetic compatibility (EMC): Generic standards - Emission standard
for industrial environments
EN 61000-6-4:2001 Electromagnetic compatibility (EMC): Generic standards - Immunity for
industrial environments
Other standards
For the design of the safety concept some parts of the following legally not
bounded european standards has been used.
General procedure and safety principles
EN ISO 12100-
1:2003
Safety of machinery - Basic concepts, general priciples for design - Basic
terminology, methodology
EN ISO 12100-
2:2003
Safety of machinery - Basic concepts, general principles for design - Part 2:
Technical principles
To Next Page
Loading...