Handheld Terminal Accessories
User's Manual, Version: 1.3 121
© KEBA 2007
10.4.3 Technical data of the connection terminals
The following technical data apply to the X1 and X3 connector terminal
blocks already available in the Junction box:
Connection capacity:
rigid / flexible / wire gages [mm²]/[mm²]/AWG 0.14-1.5 / 0.14-1.5 / 28-16
flexible with wire end ferrules without / with plastic sleeve [mm²] 0.25-1.5 / 0.25-0.5
Grid dimension: 3.81
Insulation length: [mm²] 7
Tightening torque: [Nm] 0.22-0.25
PHOENIX order data:
Gateway- PHOENIX
terminal block Type Part no.
X1 MCVR 1.5/6-ST-3.81 1827169
X3 MCVR 1.5/7-ST-3.81 1827172
X4, X4B MCVR 1.5/10-ST-3.81 1827208
Notice
• Consider the connection capacity of the terminal blocks when selecting
the connection cable.
• Use the following screwdriver to connect the wires to the terminal
blocks:
Blade: 0.4 x 2.5 x 80 mm,
Length: 160 mm
• Multi-line connections (2 wires in one terminal) are not allowed. Use the
X4B terminal block for continuing the field bus.
To Next Page
Loading...