Keba KeTop T50VGA - Page 58

Software KeTop T50VGA
58 User's Manual, Version: 1.3
© KEBA 2007
KtpGetJoystickPosEx
Declaration
UINT8 KtpGetJoystickPosEx(/*[out]*/int *posX, int *posY,
int *posZ);
Description
Gets the current joystick position.
Arguments
Each component in the structure may only range between -15 and 15.
Remarks
Calling this function is only allowed if a joystick is installed on the de-
vice. If no joystick is installed the values of the components are unde-
fined.
KtpGetJoystickPosRaw
Declaration
UINT8 KtpGetJoystickPosRaw (/*[out]*/TktpJoystickPosRaw
*p_jPos);
Description
Gets the actual raw data of the joystick.
Arguments
-
Remarks
Calling this function is only allowed if a joystick is installed on the de-
vice. If no joystick is installed the values of the components are unde-
fined.
KtpGetJoystickPosRawEx
Declaration
UINT8 KtpGetJoystickPosEx(/*[out]*/UINT16 *posX, UINT16
*posY, UINT16 *posZ);
Description
Gets the actual raw data of the joystick.
Arguments
-
Remarks
Calling this function is only allowed if a joystick is installed on the de-
vice. If no joystick is installed the values of the components are unde-
fined.
KtpSetJoystickCalibData
Declaration
UINT8 KtpSetJoystickCalibData(/*in*/TKtpJoystickChannel ch
UINT16 rawMin, UINT16 rawCenter , UINT16 rawMax, UINT16
calibRange);
Description
Calibrates the axis of the joystick.
Arguments
TktpJoystickChannel ch: channel to be calibrated.
UINT16 rawMin: value for smallest raw value
UINT16 ramCenter: average value for raw data
UINT16 rawMax: maximum value of raw data
UINT16 calibRange: maximum range of joystick
Remarks
This function may only be called if a joystick is installed on the device.
If no joystick is installed, the value of the components are undefined.
KtpGetOverridePoti
Declaration
UINT8 KtpGetOverridePoti(/*out*/UINT8 *p_pos);
Description
Gets the current value of the override potentiometers.
Arguments
Pointer to the variable containing the current value of the override po-
tentiometer.
Remarks
This function may only be called if a override potentiometer is installed
on the device. If no override potentiometer is installed, the value of the
components are undefined.