Keba KeTop T50VGA - Page 60

Software KeTop T50VGA
60 User's Manual, Version: 1.3
© KEBA 2007
7.4.5 LED Functions
Because the SxTPU2 is not equipped with LEDs, following functions are
not relevant.
KtpSetKeyboardLed
Declaration
UINT8 KtpSetKeyboardLed(/*in*/UINT8 ledNr, TLedState led-
State);
Description
Switches the set LED to the desired state.
Arguments
UINT8 ledNr: number of LED to be set.
UINT ledState: state, the LED is set to.
KtpGetKeyboardLed
Declaration
TLedState KtpGetKeyboardLed(/*in*/UINT8 ledNr);
Description
Returns the state of the desired LED.
Arguments
UINT8 ledNr: number of LED.
7.4.6 Other Functions
These functions perform various actions on the device.
KtpGetStatus
Declaration
UINT8 KtpGetStatus(/*[out]*/Status *p_tpuStatus);
Description
Gets the start-up state of the handheld terminal.
Arguments
Status *p_tpuStatus, pointer to memory area that will receive a copy of
the status structure.
KtpWriteToFlash
Declaration
UINT8 WriteToFlash(void);
Description
Writes the registry of the device to the flash.
Arguments
-
KtpReset
Declaration
UINT8 KtpReset(void);
Description
Restarts the device new.
Arguments
-
KtpGetVersionString
Declaration
UINT8 KtpGetVersionString(/*out*/TCHAR *wszVersionString,
unsigned int bufferLen);
Description
Returns the state of the KeTop during start-up.
Arguments
TCHAR *wszVersionString: pointer to buffer for the versions string
unsigned int bufferSize: length of transferred buffer.