Keba KeTop T50VGA - Introduction to the KeTop Handheld Terminal; Purpose of the Document; Target Groups and Pre-conditions; Intended Use of the Handheld Terminal

Handheld Terminal Introduction
User's Manual, Version: 1.3 9
© KEBA 2007
1 Introduction
1.1 Purpose of the document
This document describes the handheld terminal KeTop T50VGA.
1.2 Target groups, pre-conditions
Target group Knowledge and skills pre-requirements
Project engineer
• Basic technical training (University of Applied Science/University
level or corresponding professional experience),
• Knowledge in:
• working mode of a PLC,
• safety instructions,
• the application.
Commissioning
technician
• Fundamental technical training (technical college, qualification as
an engineer or corresponding practical experience).
• Knowledge of:
• Safety regulations,
• The method of operation of the machine or plant,
• Fundamental functions of the application,
• System analysis and troubleshooting,
• The setting possibilities at the operating devices.
Service technician
• Basic technical training (Vocational high school, engineer training
or corresponding professional experience).
• Knowledge in:
• working mode of a PLC,
• safety instructions,
• working mode of machine or plant,
• Diagnosis possibilities,
• systematic error analysis and rectification.
1.3 Intended Use of the Handheld Terminal
The intended use of the Handheld Terminal covers tasks like watching and
parametrizing up to operating of machines e.g.:
z Injection moulding machine
z Robots
z Machine tools
z Textile machines
z Printing machines
z Theater backdrops
z and similar.