1.8 Foot up⑻
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.9 foot down⑽
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head
andfoot actuators start moving;
1.10 Flat⑾
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat；
1.11 Massage head⑴
Click MASSAGE HEAD button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3；
1.12 Massagefoot⑵
Click MASSAGE Foot button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3；
1.13 Massagehead and foot⑶
2 Click MASSAGE Head and Foot button, head and foormassage motor switches massage
intensity, massage intensityswitches among 0-1-2-3；
1.14Memory position ⑿ ⒀
Click memory position to move the actuator to the memory position.
To Next Page