Keeson MC120PR - Foot Actuator Control; Multifunction Port Usage; Power and Pairing LED Indicators; Power Connection

Issue department：Bedding Division Date：
2017-05-03
ProductFunction
instruction
Author：
Kyle
MC120PR
Version： 1.1
Page 2 of 3
2
1.4. Power LED& PAIRING LED
Powersupplyforcontrolbox,PAIRINGLEDofcontrolboxflashesfor4times,andthenturnsoff,POWERLEDturns
on。
1.5. Power
Connecttothe29VDC;
1.6. Test for underbed light
Clickbuttonofunderbedlight,turnson(orturnsoff)theunderbedlight,switchthestatusoncewhenclick once；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
1.7. FLAT function
PressandreleasetheFLAT buttonon remote，theheadandfoot actuatorsmovestolowerposition(whenthe
actuatorisfree,canturnoffthevibrationmotorandturnofftheindicatorlightwhenpressonce)，stopwhen
pressanybuton；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
1.2. FOOT port
Connecttofootactuator,controlbyremotesingle:
Clickfoot up button，footactuatormovesout，stopwhenreleased；
Clickfoot downbutton，footactuatormovesin，stopwhenreleased；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
1.3. MULTIFUNCTION port
ConnectwiththesameotherControlboxorOtheraccessories;