EasyManua.ls Logo

KEEWAY versilia 125 User Manual

KEEWAY versilia 125
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the KEEWAY versilia 125 and is the answer not in the manual?

KEEWAY versilia 125 Specifications

General IconGeneral
Displacement124.6 cc
TransmissionCVT
Fuel Tank Capacity6.5 liters
Front SuspensionTelescopic fork
Front BrakeDisc
Rear BrakeDrum
Front Tire120/70-12
Rear Tire130/70-12
Width700 mm
Seat Height770 mm
Weight120 kg
Top Speed90 km/h
Engine TypeSingle cylinder, 4-stroke, air-cooled
Max Torque9.2 Nm @ 6, 500 rpm
Fuel SystemElectronic Fuel Injection

Summary

Preface

Welcome and Purpose

User welcome and introduction to the manual's purpose for safe and pleasant driving.

Important Attention Points

Safety and Operational Warnings

Critical points regarding driver/passenger limits, weather conditions, road safety, and reading warnings.

I. Notice for safe driving

Rules for Safe Driving

Guidelines for safe operation, visibility, speed, licensing, road conditions, and following traffic rules.

Load Capacity Regulations

Details on maximum payload, weight limits for carrier and luggage box, and effects of overloading.

II. Various Parts Name and Instruction

Parts Identification

Identifies and illustrates key physical components and their locations on the scooter.

Dashboard and Indicators

Explains the function of dashboard instruments like speedometer, fuel gauge, and warning lights.

Ignition Switch Operation

Describes the operation of the ignition switch, including its lock and key functions.

Steering Lock and Keyless Ignition

Details how to lock the steering and operate the smart key system for anti-theft.

Seat and Handlebar Lock

Covers how to lift the seat and lock the handlebar using the ignition switch.

Vehicle Controls and Switches

Details the function of various switches: warning lights, flameout, electric start, headlight, turn signals, and horn.

III. Operation Instruction

Pre-Ride Inspection Checklist

Essential pre-ride inspection checklist including handlebar, lights, oil, brakes, throttle, and tires.

Fueling and Engine Oil Checks

Information on fuel capacity, recommended gasoline, fueling procedures, and checking engine oil.

Brake System Inspection

Covers inspection of brake pads, fluid level, front disc brakes, and rear drum brakes.

Tire Inspection and Maintenance

Guidance on checking tire pressure, tread depth, and condition, with admonitions.

Starting and Driving Procedures

Instructions for starting engine, break-in period, and safe driving practices.

Braking Operation Guide

How to properly use the throttle and brake systems for slowing down and stopping.

Engine Shutdown and Parking

Procedures for turning off the engine, parking the motorcycle safely, and anti-theft measures.

IV. Maintenance and Service

Scheduled Maintenance Plan

Schedule for regular maintenance based on odometer readings and time intervals.

Routine Service Tasks

Covers air filter cleaning, spark plug service, and fuse replacement.

Fluid and Battery Care

Guidance on battery maintenance, engine oil replacement, and gear oil service.

Clutch and Belt Inspection

Instructions for inspecting the clutch and CVT belt for wear.

V. Vehicle Storage

Long-Term Storage Procedures

Steps to take to prevent damage when the vehicle is not used for an extended period.

Post-Storage Vehicle Preparation

Instructions for preparing the vehicle for use after a long storage period.

VI. Vehicle Identification

Vehicle and Engine Number Location

Details the location of the model code, VIN, and engine number for registration and service.

VII. Tool Kit

Tool Kit Contents

Lists the tools provided with the vehicle, typically found in the luggage box.

VIII. Technical Specifications

Vehicle Specifications Summary

Provides detailed technical data including dimensions, performance, and electrical components.

IX. EFI System Manual

EFI System Overview and Description

Introduction to the EFI system, its components, and general description.

EFI System Safety and Diagnostics

Precautions, tools, and fault code-based maintenance for the EFI system.

EFI Performance Troubleshooting

Guidance on diagnosing performance issues and checking EFI system components.

Related product manuals