KEF q series User Manual

Model
Design
Drive units
Frequency range free field (-6db)
Frequency response (±3db)
Crossover frequency
Amplifier requirements
Sensitivity (2.83v/ Im)
Maximum output
Nominal impedance
Weight
Dimension (H x W x D)
Dimension (H x W x D) •with plinth
•
0
0
0
QSS0
2.5-way bass reflex
130mm (S.25in.) aluminium Uni-Q
25mm ( I
in.) vented aluminium dome HF
130mm (S.25in.) Hybrid aluminium LF
2 x 130mm (S.25in.) aluminium ABR
45Hz-S0kHz
58Hz-28kHz
2.SkHz
IS-130W
87d8
I 10d8
80 (min.3.50)
14.5kg (32 lbs)
873 x 180x278 mm
926x299x310mm
0
0
0
Q750
2.5-way bass reflex
165mm (6.Sin.) aluminium Uni-Q
0
0
0
Q950
2.5-way bass reflex
200mm (8in.) aluminium Uni-Q
25mm ( I in.) vented aluminium dome HF 38mm (I.Sin.) vented aluminium dome HF
165mm (6.Sin.) Hybrid aluminium LF 200mm (Sin.) Hybrid aluminium LF
2 x 165mm (6.Sin.) aluminium ABR 2 x 200mm (8in.) aluminium ABR
42Hz-SOkHz 38Hz-33kf----lz
48Hz-28kHz 44Hz-28kHz
2.SkHz 2.2kHz
15-IS0W IS-200W
88d8 9 ldB
11 ldB I 13dB
80 (min.3,80)
80 (min.3.20)
16.5kg (36.4 lbs) 20.6kg (45.4 lbs)
923x210x306mm 1062x244x328mm
977x323x310mm I I 16x357x328 mm
KEF reserves the right, in line with continuing research and development, to amend or change specifications. E&OE.
11

KEF q series Specifications

General

Series	Q Series
Type	Bookshelf, Floorstanding
Uni-Q Driver Array	Yes
Enclosure	Bass reflex
Sensitivity	Varies by model (e.g., 87dB)
Impedance	8 Ohms
Maximum Output	Varies by model
Crossover Frequency	Varies by model
Bass Driver Size	Varies by model
Tweeter Size	1 inch
Dimensions (H x W x D)	Varies by model
Weight	Varies by model