To Next PageTo Next Page
Need help?Do you have a question about the KEF Q500 and is the answer not in the manual?
General| Type | Floor-standing speakers |
|---|---|
| Output power | 130 W |
| Dimensions (WxDxH) | 180 x 272 x 870 mm |
| Center speaker impedance | 8 Ω |
| Tweeter | Yes |
| Woofer diameter | 130 mm |
| Tweeter diameter | 25 mm |
| Audio output channels | 2.0 channels |
| Driver diaphragm material | Aluminum |
| Sensitivity | 87 dB |
| Crossover frequency | 2500 Hz |
| Product color | Wood |
Weight and Dimensions| Weight | 15000 g |
|---|
Welcomes the user and highlights the Q Series' performance and the importance of reading the manual.
Explains the meaning of icons used throughout the manual for safe installation and operation.
Explains symbols related to switching the appliance off, reading information, or indicating sound changes.
Explains symbols related to reading information or indicating sound changes.
Emphasizes following the manual for optimal speaker performance and results.
Details cleaning methods and restrictions on using chemical cleaners for speaker maintenance.
Advises on avoiding humidity and damp conditions for proper speaker operation.
Advises against exposing speakers to extreme temperatures for optimal operation and longevity.
Recommends avoiding direct sunlight exposure for the speakers to prevent damage or degradation.
Highlights the danger of trailing cables and the necessity of securing all cables for safety.
Guides on how to attach the plinth to specific speaker models (Q500/Q700/Q900) using provided diagrams.
Provides visual guidance and diagrams for optimal speaker placement in various room setups.
Details the setup for connecting speakers with a single wire using the provided terminals.
Details the setup for connecting speakers using two wires, facilitating bi-wiring.
Explains the single wire connection method using speaker terminal blocks for various models.
Explains the bi-wired connection method using speaker terminal blocks for various models.
Describes the single wire setup specifically for the Q200c and Q600c center/surround speaker models.
Details the bi-amplification setup, connecting separate amplifiers to high and low frequency drivers.
Shows detailed diagrams illustrating bi-wired connection configurations for different speaker models.
Shows detailed diagrams illustrating bi-amplified connection configurations for different speaker models.
Covers issues related to whether the speaker is working or not, and their potential causes.
Addresses problems related to switching speaker cables or incorrect cable management.
Details problems with treble, mid-range, bass, intermittent sound, or distorted audio, and solutions.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q100 model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q300 model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q500 model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q700 model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q900 model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q200c model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q600c model.
Details technical data including drive units, frequency response, sensitivity, and dimensions for the Q800ds model.
