7. Lastly you need to attach the
collection tube with the olive
fitting. Tighten up this fitting
onto the flow control device
and give it a small tighten
with a spanner/shifter. Do
not over tighten as its easy to
damage the soft brass
fittings.
8. Please note it is important
that the breather hold is
unobstructed and is also
facing UPWARD. The
breather hold is so unwanted
sulphide smells escape to
atmosphere.
Distributed by:
KegLand Distribution PTY LTD
www.KegLand.com.au
www.KegLand.cn
+61 3 90187935
To Previous Page