KegLand Mini 360 - Page 2

Mini 360 Core Actuator Regulator Instruction Manual
Page 2 of 14 www.KegLand.com.au Last Updated 4/08/2020 11:09 AM
WARNING
WHEN ATTACHING AND DISCONNECTING THE REGULATOR TO/FROM A
SODASTREAM CYLINDER ALWAYS HOLD THE NECK OF THE SODASTREAM
CYLINDER WITH A SPANNER TO PREVENT THE NECK OF THE CYLINDER
ROTATING
WARNING
ALWAYS PERFORM A LEAK TEST PRIOR TO USE. FAILURE TO DO SO MAY
RESULT IN A LEAK OCCURRING AND YOUR CO2 CYLINDER OR BULB
EMPTYING
WARNING
DO NOT SUBMERGE THE REGULATOR IN LIQUID AT ANY TIME
WARNING
ALWAYS ENSURE THE REGULATOR IS SET TO A HIGHER OR EQUAL
PRESSURE TO THE KEG TO AVOID LIQUID ENTERING THE REGULATOR. IF
LIQUID ENTERS THE REGULATOR IT CAN RESULT IN THE REGULATOR BEING
DAMAGED.
WARNING
DO NOT OVERTIGHTEN THE GAS BULB/CYLINDER ONTO THE REGULATOR