Step 2
Step 3
Step 2: Clean the front windshield, take off the protective film from the
bottom of suction cup that connected to the DVR, align the DVR with the
windshield, then press the lock to make sure the suctioncup is locked on
the front windshield tightly.
Step 3: Switch the rotating button, and adjust each angle of the DVR to
the best shooting position. Then tighten the switch button of the bracket.
5
English
screw caps
Removal handle
Protective film of the
suction cup
Front windshield
Screw caps
To Next Page
Loading...