5 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
max.
min. 250**
min. 100**
DN
Drinking water installation
In order to prevent stagnation and bacterial contamination
in the supply, it is recommended to loop the tap in
the drinking water system.
* For technical and hygienic reasons, it is necessary to
install cute the last min. 100 mm and max. 10 x DN as a
functional individual supply line.
** The tap must be installed at least 250 mm above
the maximum fluid level.
Warning! The FROSTI must be installed in accor-
dance to Water Regulations, schedule 2, paragraph
15. The level of protection must be appropriate to
the fluid category.
BS EN 1717
To Next Page
Loading...
