Kemppi X8 MIG User Manual

X8 MIG WELDER 2.3 Installation
8.
Trim the excess filler wire at a slight angle to improve ignition.
9.
Check the gas flow rate.
The welding gun is now ready for use. When not using the gun, keep it in the welding gun holder on the wire
feeder.
2.3.6.2 Replacing consumable parts of welding gun
Select a suitable contact tip, gas nozzle, neck and wire liner according to the job. See also how to change the
feed rolls of the wire feeder accordingly: Replacing feed rolls on page 37.
Standard delivery set of consumable parts
The tables below list the consumable parts that are delivered with the welding gun. To find other compatible
parts for various materials, use Kemppi's Consumable Kit Selector at kitselect.kemppi.com.
Gas-cooled guns
X8 MIG Gun 200-g (3.5m) X8301203500
X8 MIG Gun 200-g (5.0m) X8301205000
X8 MIG Gun 300-g (3.5m) X8301303500
X8 MIG Gun 300-g (5.0m) X8301305000
Contact tip W012132
Contact tip adapter W011483
Gas nozzle W011478
Wire guide tube SP011868
X8 MIG Gun 200-g (3.5m) X8301203500
X8 MIG Gun 300-g (3.5m) X8301305000
Wire liner W012361
X8 MIG Gun 200-g (5.0m) X8301205000
X8 MIG Gun 300-g (5.0m) X8301305000
Wire liner W012362
OPERATING MANUAL | EN 61
©
KEMPPI | 2018-09-28

Kemppi X8 MIG Specifications

General

Brand	Kemppi
Model	X8 MIG
Category	Welding System
Language	English