EasyManua.ls Logo

KEN STONE XN10-8 - Machine Service Data and Specifications; Fuel Tank Operation and Quality

KEN STONE XN10-8
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Service Data
Fuel tank
Diesel
To maintain the performance and life of engine, please always use
clean and high-quality fuel.
To prevent freezing in cold weathers, please choose diesel still
suitable when the actual temperature is less by at least 12 than
the expected minimum outside temperature.
Please use diesel with cetacean number at 45 or higher. During
the operations in low temperature or high altitude regions, use
fuel
of higher cetacean number.
Use fuel with sulfur content (volume ratio) at <0.5%.
Use ultra-low sulfur fuel especially in U.S. and Canada.
The use of fuel with high sulfur content can probably result in
sulfur acid corrosion in engine cylinders.
Do not mix the diesel with kerosene, used engine oil, or residual
fuel. It’s prohibited to use kerosene.
The low quality fuel will reduce the engine performance and/or
damage the engine.
It’s not recommended to use fuel additives. Some fuel additives
will deteriorate the engine performances.
Safety measure for use of bio-diesel
The warranty regulation of the engine manufacturer is void for the
engine using disqualified or deteriorated bio-diesel.
5-5

Table of Contents

Related product manuals