KEN STONE XN10-8 - Critical Safety Parts Identification and Replacement

Maintenance
Critical Safety Parts
Critical Safety Parts
To operate the machine safely, please fulfill the periodical checking and maintenance. The following
critical safety parts shall be replaced periodically to improve safety. These parts can cause serious
injuries or fire accident if they are damaged.
List of Critical Safety Parts
5-11
Vehicle body
Periodically replaced critical safety part
Replacement period
Fuel system
Fuel pipes
Every 2 years
Packing on fuel tank cover
Heater
Heater hoses
Cooling system
Rubber hoses
Hydraulic
system
Main
machine
Hydraulic pipe (Pump outlet)
Hydraulic pipe (Pump oil suction port)
Hydraulic pipe (Slewing motor)
Hydraulic pipe (Traveling motor)
Working
device
Hydraulic pipe (Boom cylinder pipeline)
Hydraulic pipe (Bucket arm cylinder
pipeline)
Hydraulic pipe (Bucket cylinder pipeline)
Hydraulic pipe (Swing cylinder)
Hydraulic pipe (Bulldozing blade cylinder)
Hydraulic pipe (telescopic cylinder)
Hydraulic pipe (Auxiliary pipeline)
Anti skid plate
Every 3 years