EasyManua.ls Logo

KEN STONE XN10-8 - Long-Term Machine Parking Guide; Restarting Machine After Long Parking; Engine Preparation for Reuse

KEN STONE XN10-8
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Maintenance during Long-Time Parking
b. Stop for 30s.
c. Repeat this procedure, till the engine
is already cranked for 1min in total.
This can enable the sufficient oil
circulation throughout the lubrication
system of engine.
2. Get ready the fuel system.
3. Start the engine. Idle the engine for
approximately 15min and then:
Check for normal oil pressure.
Check for leakage of fuel, engine oil, and
coolant and check indicator lamps and/or
level gauge for normal functioning.
5. Avoid operating for a long time at minimum
or maximum engine speed or operating the
loaded residue within the first loading hour.
5-45

Table of Contents

Related product manuals