Safety
General Precautions
Be careful to avoid crushing or cuts
Never place your hand, foot, or other body parts
between the superstructure and chassis or tracks,
between machine body and working device, or
between cylinder and motion parts. During
movement of machine, these clearances will
change to probably cause serious injuries or
deaths.
1-7
Use of Accessories
● Please consult with Ken stone company
before installing accessories. Based on the
attachment types and their combinations,
the attachments will probably come into
contact with the cab or other machine parts.
Before use, ensure that the installed
accessories will not come into contact with
other parts.
● Do not use any attachment not approved
by Ken stone company. Otherwise, it will
probably endanger the safety or cause
adverse influence on operations or life of
machine.
● Ken stone company will not be liable for
any injury, accident, or product damage
arising from the use of non-approved
attachments.
No Modification to Machine
The non-authorized modifications to the
machine will cause injuries or deaths.
All non-authorized modifications are prohibited
for any part of machine.
● During operations, the non-authorized
personnel are prohibited to access the
working zone.
● Please strictly abide by the rules and
environmental standards applicable for this
working zone.
To Next Page
Loading...