KEN STONE XN10-8 - Machine Technical Specifications; XN10-8 Basic Technical Parameters

Parameters
Basic Parameters
Applicable models: XN10-8
7-2
Technical parameters
Unit
Operating weight
kg
1010
Bucket capacity
m
3
0.02
Type of working device
Backhoe
Engine
Model
Koop 192
Displacement
L
0.499
Rated output power/speed
kw/r/min
7.6/3000
Maximum torque/rotating speed
N.m/r/min
25/2860
Speed
Maximum traveling speed (High/low)
km/h
1.3
Slewing speed
rpm
11
Maximum grade ability
30%
Tracks
Ground pressure
k Pa
30.95
Material
Rubber
Tension control type
Tightening cylinder
Hydraulic
pump
Type
gear pump
Working pressure
Mpa
16
Flow
(L/min)
19.5
Hydraulic oil tank capacity
(L)
16
Tank
capacity
Fuel tank capacity
(L)
11
All ratings of the machine are obtained when the machine is operating on a solid horizontal support
surface. If the working environment conditions of the machine differ from the above-mentioned
reference conditions (Such as the operations on uneven ground and slope), the operator shall take these
conditions into consideration.