Safety
Precautions for Maintenance
the any place near the working device pin
or hydraulic cylinder.
● Before the welding of machine body,
disconnect the connector of electronic
control device.
Vibration Applied on Operator
According to the results of the test on the
vibration transmitted from the machine to the
operator, the vibration applied on the operator’s
upper limbs is <2.5m/s
2
and the vibration
applied on the operator’s body in the seat is
<0.5m/s
2.
Checking after Maintenance
● Accelerate the engine speed slowly from
low idling speed to fastest speed and check
for leakage of oil or water from repaired
parts.
● Operate all joysticks and check machine
for normal operations.
Waste Disposal
● Ensure to collect the drained oil of
1-34
machine into a container. The improper
treatment of waste oil will pollute the
environment.
● While disposing harmful objects,
including lubricating oil, fuel, coolant,
solvent, filter, and battery, please abide by
the applicable laws and regulations.
Disposal of Harmful Chemicals
The direct contact with harmful chemicals will
cause serious harms. The harmful chemicals
used in this machine include oils/greases,
battery electrolyte, coolant, paint, and adhesive.
Please dispose the harmful chemicals carefully
and properly.
To Next Page
Loading...