KEN STONE XN10-8 - Pre-Operation Checks and Procedures; Safe Mounting and Dismounting; Daily Walk-Around Machine Check; 10-Hour Routine Checks

Operations
Before Start of Operations
Before Start of Operations
Getting on/off Machine
Warning
● Do not jump on or off the machine. Do not
attempt to get on or off a moving machine.
● While getting on/off the footplates, hold
the handrails to support your body weight
and maintain three-point balance posture
(Hands and feet) for your body.
● Do not use safety lock handle or any
joystick as handrail.
3-2
Walk-Around Checking
Before the first start of engine each day, fulfill
one walk-around checking.
Refer to page 5-15 and 5-16 “Maintenance,
Walk-Around Checking”.
Daily Routine Checking
Before the first start of engine each day, fulfill
one walk-around checking.
Refer to page from 5-17 to 5-21 “Maintenance,
daily routine inspection”.