KEN STONE XN10-8 - Machine Operation Procedures; Joystick Mode Confirmation; Upper Frame Slewing Operation; Boom Operation: Lowering and Raising

Operations
Operations of Machine
Slowly place the left and right traveling levers
to neutral position. Stop the machine.
Operations of Working Device
Warning
● Before starting operations, please
carefully check and confirm the joystick
mode to be used.
● The descriptions in this manual use the
ISO mode of machine.
Use the right joystick to control the boom and
bucket.
Use the left joystick to operate the arm and
slewing.
Return the joysticks to neutral position to stop
the bucket working device.
Lower down the safety lock handle to the
unlocking position.
3-12
Before slewing, check the surrounding area
for safety.
Slew the up-frame left: Push the left
joystick left.
Slew the up-frame right: Push the left
joystick right.
Slewing
Warning
Lower boom:
Push the right joystick forward .
Raise the boom:
Push the right joystick backward .
Operate the boom