KEN STONE XN10-8 - Machine Operation Procedures; Arm Operation: Retract and Extend; Boom Swing Operation; Bucket Operation: Loading and Dumping

Operations
Operations of Machine
Load bucket:
Push the right joystick left.
Dump bucket:
Push the right joystick right.
Swing the boom left:
push this lever forward.
Swing the boom right:
pull this lever backward.
Operations of Bulldozing Blade
Lower bulldozing blade:
Push this lever forward.
Raise bulldozing blade:
Pull this lever backward.
3-13
Retract bucket arm:
Push the left joystick backward.
Extend bucket arm:
Push the left joystick forward.
Operations of Arm
Swing of Boom
Operations of Bucket