KEN STONE XN10-8 - Machine Operating Procedures; Downslope Braking Behavior; Track Slip Recovery Procedure; Engine Flame-out on Slope Recovery

Braking during Downs lope Traveling
While driving down a slope, the brake applies
braking automatically after the traveling joystick
returns to neutral position.
In Event of Track Slip
In event of traveling failure due to track slip
while climbing up a slope, use the digging force
of bucket arm to climb up the slope.
In Event of Engine Flame out
If the engine stops while driving down a slope,
shift the traveling joystick to neutral position,
stop the machine, and then start the engine.
3-20
Operations
Operating Procedures