skin.
• In event of accidental contact with eyes,
immediately flush by clean water and
quickly seek for medical treatment.
• In event of accidental swallowing, drink
a lot of water or milk and immediately
seek for medical treatment.
• If the sulfur acid comes into contact
with your skin or clothing, immediately
flush by a lot of water.
Checking
1. Open the maintenance cover.
2. Check the fluid level. The fluid level must
be between upper limit (H) and lower limit
(L). If not, add distilled water till the fluid
level reaches upper limit (H).
3. Check terminals for looseness and
contamination.
5-29
Adding
If the adding of distilled water is required, add
water before start of operations, in order to
prevent freezing.
1. Take out the cap (1) and add distilled
water till the upper limit (H) is reached.
2. Clean the ventilation port on the cap and
securely tighten the cap (1).
Maintenance
Every 50h
To Next Page
Loading...