Troubleshooting
Burnout of Fuse
Burnout of Fuse
If a lamp fails to turn on or the electronic
system fails to work, the fuse is probably burnt.
Check the fuse.
Checking and Replacement of Fuses
Warning
If a fuse is burnt again shortly after
replacement, the electronic system is
probably malfunctioned. The improper
repair will probably cause fire danger. If the
consultation is required, please contact your
sales or service dealer.
1. Open the fuse case cover (1).
2. Check fuses for burnout.
3. If a fuse is burnt, please replace with spare
fuse of same specification.
Layout and protected circuits of fuses
1. Rotate the starter key to OFF to stop the
engine.
2. Open the engine hood.
6-6
Burnout
Normal
Electric lock/preheat
relay
To Next Page
Loading...