EasyManua.ls Logo

KEN STONE XN12-9 - Restart after Refueling

KEN STONE XN12-9
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
Restart after Refueling
Restart after Refueling
Air exhausting from Fuel System
Important: Do not rotate the engine by starter
motor to get ready the fuel system. This will
probably cause overheating of starter motor to
damage coil, pinion, and/or ring gear.
Important: If the engine stops due to shortage
of fuel, please add fuel, rotate the key to ON for
60s, and then rotate it to START position.
Running the starter motor for a long time before
the supply of sufficient fuel will cause start
failure of starter
1. Add fuel.
2. Turn the starter key to the ON position
and hold it for about 60 seconds..
Note: The air content in the fuel system will
cause start failure or other problems of engine.
Ensure to exhaust when the fuel tank is empty
or the fuel system contains air.
6-8

Table of Contents

Related product manuals