Safety Signs
To guarantee the safety of operator and operation personnel in the working zone, please set up the
following safety signs (markings) at some portions of machine. Walk around the machine with this
manual and observe the contents and placement locations of these safety signs. Please review these
signs and operation instructions contained in this manual jointly with the machine driver.
● The safety signs shall be clean, clear, and easily legible. If any safety label falls, is damaged, or
becomes illegible, please replace with new one. Please provide your product serial number while
ordering new signs from a Ken stone Heavy Machinery service dealer.
● If a part/body on which a safety sign is affixed is already replaced, affix a new sign to new
part/body.
1-35
Safety
Safety Signs
To Next Page
Loading...