Need help?Do you have a question about the Kenmore 110.9787 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model Number | 110.9787 |
| Type | Dryer |
| Fuel Type | Electric |
| Capacity | 7.0 cu. ft. |
| Color | White |
| Number of Temperature Settings | 4 |
| Voltage | 240V |
| Width | 29 inches |
| Weight | 120 lbs |
| Amperage | 30 amps |
Details the terms of the one-year limited warranty for the appliance.
Covers the two-year limited warranty for the electronic control board.
Lists items not covered and limitations on implied warranties.
Explains safety symbols and meanings of DANGER and WARNING.
Essential safety steps for gas dryers and emergency actions.
Lists necessary tools and parts for installation.
Warns against flammable materials near the dryer.
Details necessary space for installation and operation.
Recommended spacing for confined installations.
Specifies spacing for undercounter and cabinet installations.
Warns about shock and proper grounding procedures.
Details the importance and method of grounding the dryer.
Safety warnings for gas and conversion between natural and LP gas.
Requirements for gas line, fittings, and shutoff valves.
Critical warnings about fire risks due to venting.
Recommends heavy metal vent material and 45° elbows for optimal airflow.
Shows typical rear, side, and bottom exhaust installation options.
Covers unused exhaust holes and fire hazard warnings.
Describes over-the-top and periscope vent installations.
Guides on selecting the best vent route and length for efficiency.
Steps for connecting the dryer vent to the exhaust hood.
Instructions for leveling the dryer and making the gas connection.
Details on securely connecting the vent to the dryer exhaust.
Steps to remove the dryer door for swing reversal.
Instructions for reversing the door hinge and handle.
Steps for reassembling the door after swing reversal.
Final electrical safety checks and starting the dryer.
Steps to plug in, clean, and test the dryer for operation.
Basic steps to power on, select cycles, and start the dryer.
How to select, use, and adjust Auto Cycles for drying.
Explains the technology behind Auto Moisture Sensing Plus.
How to use Timed Cycles, stop, pause, and general drying tips.
How to lock and unlock the control panel to prevent changes.
Explains the meaning of lights indicating cycle progress.
Overview of Timed Cycles and Auto Cycles for different loads.
Chart of Auto Cycle load types, temps, and estimated times.
Explains Timed Dry, Express Dry, and Touch Up cycles.
Explains options like Wrinkle Guard, Damp Dry Signal, Button Sounds, Drum Light.
How to adjust time, temperature, and dryness for Timed Cycles.
How to modify cycles, options, and modifiers before or after starting.
How to change modifiers or options after a cycle has started.
How to adjust the default dryness level for Auto Dry cycles.
Instructions for using the Tumble Free Heated Dryer Rack.
Importance of keeping the dryer area clear for airflow.
Step-by-step guide for cleaning the lint screen effectively.
How to clean the drum and remove accumulated lint from cabinet/vent.
Steps for preparing the dryer for vacation or moving.
Instructions for replacing the dryer's interior light bulb.
Common problems like no start, no heat, unusual sounds, and error codes.
Solutions for poor drying, long times, or too hot loads.
Reasons for short cycles, wrinkled loads, and how to fix them.
How to resolve lint on clothes and unpleasant odors.
Details the advantages and coverage of the Master Protection Agreement.
To Next Page
