Kenmore 116.29319 - Page 12

ATTACHMENTS ON WAND
1. To remove
wands from
PowerMate,
lock wands in
straight-up
position.
Wand
Quick
Release
Pedal
2. Presswand
quick release
pedal with foot
and pull the
wands straight
up and out of
PowerMate.
The PowerMate
plug and cord
do not have to
be removed to
use attachments
on the wands.
3. Put attach-
ments on wands
as needed.
See ATTACH-
MENT USE
TABLE.
ATTACHMENT USE TABLE
ATTACHMENT
Combination
brush
Crevice fool
Floor brush
PowerMafe
Pet HondiMafe 3
Furniture1
Dusting
brush I_
Fabric C
brush II/
v'
Between
Cushions1
v'
CLEANING AREA
Bare
Drapes I Stairs Floors
i/
i/ i/
_2
t/
Carpeted
Floors/Rugs Walls
v'
1. Always clean attachments before using on fabrics.
2. 2-way switch should be in FLOOR position.
3. Pet HandiMate attachment instructions are included with the product.
= 12 =