5. Position left hand leg assembly as shown with console mounting tab facing up.
Place non-tank side of bottom pan over bottom support. Attach bottom pan with
1/4"-20 x 1/2" carriage bolt (Black) and wing nut (Black).
Console mounting tab facing up.
Bottom Pan
Bottom Su
Tank opening on right side.
6. Position right hand leg assembly as shown, with console mounting tab facing up.
Place tank side of bottom pan over bottom support. Attach bottom pan with
1/4-20 x 1/2" carriage bolt and wing nut.
Console mounting tab facing up.
/
1/4"-20 Wingnut
1/4" - 20 X 1/2" Carriage Bolt
\
\
To Next Page
Loading...
