_Di YI
............._]i
i YiL::)] ii_,__
I0
PICKINGUP BOBBINTHREAD
Raise presser foot lever.
Hold needle thread loosely in left band and rotate
hand wheel toward you one complete turn.
Bring bobbin thread up by pulling upper thread.
See illustration.
Place threads back under presser foot.
ADJUSTINGTHEPRESSUREOFTHEPRESSERFOOT-
Push down outer ring of presser foot knob See
illustration). This will release pressure of presser
foot. To increase pressure, push down inner pin
until suitable pressure is obtained.
For ordinary sewing, the inner pin should be about
half way down. When sewing multiple thickness or
heavy material, reduce the pressure, increase it
when sewing sheer fabrics.
Insufficient pressure may cause skipped stitches or
difficulty in guiding the fabric, if feed dog or presser
foot marks appear on the fabric, reduce the pressure.
To Next Page
Loading...
Need help?
General
