- 23 -
CHECK BAG Indicator 1. Full or clogged dust bag. 1. Change bag.
activates. 2. Dirty filters. 2. Clean/change filters.
3. Blocked airflow passage. 3. Clear blockage from airflow
passage.
4. Certain attachment tools. 4. This is normal. Light should go off
when tool is removed.
Vacuum cleaner picks 1. Wrong pile height setting. 1. Adjust setting.
up moveable rugs -or- 2. Suction too strong. 2. Slide the Electronic Suction Control
to a lower power setting.
PowerMate
®
pushes too
hard.
Cord won’t rewind. 1. Dirty power cord. 1. Clean the power cord.
2. Cord jammed. 2. Pull out cord and rewind.
Vacuum cleaner leaves 1. Wrong vacuuming pattern. 1. See VACUUMING TIPS (page 11).
marks on carpet.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
To Previous Page
Loading...
