Do you have a question about the Kenmore 8787 - Elite HE3 7.0 cu. Ft. Electric Dryer and is the answer not in the manual?
Details the terms of the one-year limited warranty for product defects.
Covers the two-year warranty for the electronic control board replacement.
Section to record model number, serial number, and purchase date for service.
Crucial precautions to reduce risks of fire, electric shock, or injury during dryer use.
Lists required tools and parts needed for dryer installation.
Information on purchasing and installing optional dryer pedestals.
Specifies necessary clearances around the dryer for safe operation and ventilation.
Provides the physical dimensions of the dryer for planning installation space.
Recommended spacing for installing the dryer in recessed areas or closets.
Guidelines for installing the dryer under a counter.
Spacing requirements for installing the dryer in a closet.
Recommended spacing for recessed or closet installations with a stacked washer.
Additional installation requirements specific to mobile homes.
Emphasizes user's responsibility for qualified electrical installation and code compliance.
Details how to connect the dryer to the electrical supply, including 3-wire vs. 4-wire.
Essential information on proper grounding for safety.
Step-by-step guide for connecting the dryer using a power supply cord.
Step-by-step guide for connecting the dryer via direct wiring.
Details 4-wire receptacle and direct wire connection methods.
Details 3-wire receptacle and direct wire connection methods.
Specific steps for connecting a 4-wire cable directly to the dryer.
Specific steps for connecting a 3-wire cable directly to the dryer.
Steps for connecting a 3-wire power supply cord.
Steps for connecting a 3-wire cable directly.
Guide for an optional 3-wire direct wire connection where codes prohibit cabinet-ground to neutral.
Guide for an optional 3-wire power supply cord connection.
Specifies approved materials for dryer exhaust vents (heavy metal).
Recommends rigid metal vents for best performance and durability.
Details acceptable uses and limitations of flexible metal vents.
Advises on the impact of elbow types on airflow.
Instructions on using clamps and recommended exhaust hood styles.
Information on converting the dryer for side, left, or bottom exhaust.
Guide to planning the dryer's vent path for optimal performance.
Illustrates typical rear, side, and bottom exhaust installation configurations.
Shows methods for venting in tight spaces.
Chart detailing maximum vent lengths based on turns and vent type.
Step-by-step instructions for installing the dryer's exhaust vent system.
Instructions on how to properly level the dryer using its legs.
Details on connecting the dryer's exhaust vent to the house system.
Steps to ensure the dryer is properly leveled for optimal operation.
Instructions for changing the direction of the dryer door swing.
Instructions for reversing the dryer door handle.
Steps for reassembling the dryer door after modification.
Final checks and actions to complete the dryer installation process.
Essential safety warnings and basic steps to start the dryer.
Guide on selecting and using automatic drying cycles.
Explains the functionality of the automatic moisture sensing system.
How to pause, restart, or stop the dryer cycle.
How to enable and disable the control lock feature.
Provides advice for optimal drying and fabric care.
Explains the meaning of various indicator lights on the control panel.
Describes available drying cycles and how to select them.
Details how to use timed drying cycles and their preset settings.
Explains available options to customize drying cycles.
How to use the signal for approximately 80% dry clothes.
How to adjust or turn off button beeps.
How to operate the interior drum light.
How to adjust time and temperature for timed cycles.
How to change settings before or after starting a cycle.
How to adjust default dryness levels for auto cycles.
How the end-of-cycle signal alerts the user.
Instructions for using the special heated dryer rack.
How to keep the area around the dryer clean.
Instructions for cleaning the lint screen before each load.
How to clean the dryer drum and remove stains.
Guidance on removing lint from the cabinet and vent.
Steps for preparing the dryer for vacation or moving.
Instructions for securing the dryer during moving.
Common operational problems and their solutions.
Addresses potential causes of unusual noises from the dryer.
Explains error codes and their meanings.
Troubleshooting common drying performance problems.
Addresses issues where the automatic cycle ends too early.
Explains why lint might appear on clothes.
Reasons for stains on clothes or inside the dryer drum.
Causes of wrinkled clothes after drying.
Explains potential causes of odors from the dryer.
Information on in-home repair services and parts.
Information on carry-in repair services for smaller items.
How to purchase protection or maintenance agreements.