Kenmore AllergenSeal FeatherLite MAX DU4399 User Manual

ABOVE FLOOR MODE
1. Place the vacuum cleaner in the upright
locked position.
2. Press the wand release button and lift up
the wand for above floor cleaning.
3. Choose the desired attachment and
insert it into the wand.
4. Once the vacuum is on, operate the
vacuum cleaner by tilting the wand back
towards you and with the nozzle flush
with the floor surface.
NOTE:
Brushroll does not rotate in
either mode when handle is in fully upright
position.
5. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE:
Select the right mode when using
this vacuum cleaner. It is not recommended
to use the "II" position when cleaning bare
floor as damage to the floor may occur.
BRUSHROLL STATUS INDICATOR
4. Turn on the vacuum cleaner by pressing
the switch to the “I” position.
5. Once you have completed vacuuming,
switch to the “O” position and unplug
the power cord from the power outlet.
NOTE:
The attachment also can insert
directly into the handle for above floor
cleaning.
CAUTION
Do not allow the vacuum cleaner to
remain in one spot for any length of time
when the brushroll is turning. Damage
to carpet may occur.
- 12 -
OPERATION MODES
Light Color Status
Green,
Continuous
The brushroll is spinning and
working as it should.
Red, Continuous
There is a jam in the
brushroll area. Turn off and
unplug the vacuum, and
remove any blockages in
the nozzle.
No Light The brushroll is off.
Brushroll
Status
Indicator
Wand Release Button
Handle
3-1 Combination
Tool
3-1 Combination
Tool
Wand

Kenmore AllergenSeal FeatherLite MAX DU4399 Specifications

General

Brand	Kenmore
Model	AllergenSeal FeatherLite MAX DU4399
Category	Vacuum Cleaner
Language	English