It is recommended to clean the foam and
felt filters with cold water every three
months.
NOTE:
When the cleaning of filters no
longer restores vacuum cleaner suction
to full power, or the filters are worn or
broken, replace the filters. To purchase
filters, call 1-877-531-7321 (US) / 1-844-
608-3081 (CA).
Regularly clean and replace the filters to
keep the vacuum's suction power optimal.
1. Remove the dust cup as outlined in
EMPTYING DUST CUP (page 18-19).
2. Remove the foam and felt filters.
5. Reinstall the dust cup. See EMPTYING
DUST CUP (page 18-19).
3. Wash with cold water only. DO NOT
use detergent or soap. Squeeze by hand
and allow to air dry. Allow all filters to
dry 24 hours before putting back into
vacuum cleaner.
NOTE:
DO NOT operate without foam
and felt filters installed.
DO NOT wash in the dishwasher.
DO NOT install foam and felt filters if
damp.
4. Replace foam and felt filters into the
vacuum cleaner.
- 20 -
FOAM AND FELT FILTERS CLEANING
Foam Filter
Felt Filter
Foam Filter
Felt Filter
To Next Page
Loading...
Need help?
General
