Kenmore FeatherLite Lift-Up DU4080 - Checking Connection Hose for Clogs

CHECKING CONNECTION HOSE FOR
CLOGS
1. To separate the body from the nozzle,
press the motorized nozzle release pedal
with foot and lift up the body.
2. Check and remove any clogs in the
connection hose.
3. Reattach the nozzle onto the vacuum
body.
- 23 -
2. Release the wand from the body and
make sure that attachments are removed
from the wand.
3. Check and remove any clogs in the
flexible hose and the wand.
4. Reinstall the wand and the flexible hose
to the vacuum cleaner. See ASSEMBLY
(page 8).
REMOVING CLOGS
Motorized Nozzle
Release Pedal
Connection Hose