To Next PageTo Next Page
Need help?Do you have a question about the Kenmore HE4t 110.4508 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Capacity | 4.5 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Spin Speed | 1200 RPM |
| Width | 27 inches |
| Steam Function | Yes |
| Voltage | 120V |
| Frequency | 60 Hz |
| Type | Washer |
| Model Number | HE4t 110.4508 |
Details of the extended service plan for Kenmore products, including expert service and guarantees.
Outlines specific warranties for the washer's drum, tub, controls, and mechanical/electrical parts.
Details the one-year warranty for mechanical parts of an optional pedestal.
Crucial safety precautions to reduce the risk of fire, electric shock, or injury when using the washer.
Lists necessary tools and parts for installing the washer, including optional items.
Guidance on selecting the optimal location for the washer to ensure performance and minimize noise.
Explains the different drain hose installation methods: standpipe, laundry tub, and floor drain.
Specifies the electrical supply and grounding requirements for safe washer operation.
Step-by-step guide to removing shipping bolts and preparing the washer for final placement.
Instructions for connecting the hot and cold water inlet hoses to the washer and faucets.
Proper routing of the drain hose to prevent water leakage and ensure correct drainage.
Procedures for leveling the washer to prevent noise, vibration, and walk.
Final checks and steps to complete the washer installation, including electrical and water connections.
Describes the flexible and easy-to-use electronic controls for various washing needs.
Details the multi-compartment dispenser for automatic dispensing of laundry additives.
Focuses on the washer's efficiency in saving time, resources, water, and energy.
Describes the direct injection of detergent for faster and more effective stain removal.
A step-by-step guide on how to begin operating the washing machine.
Emphasizes the necessity of using High Efficiency (HE) detergents for optimal performance and to avoid errors.
Instructions on how to correctly use the dispenser drawer for detergent, bleach, and fabric softener.
How to pause the cycle and resume it later, or cancel it.
For heavily soiled items, this cycle uses hot water and high speed to clean and sanitize.
For sturdy, colorfast, heavily soiled garments, it uses fast tumbling and high spin.
Suitable for no-iron fabrics like blouses, shirts, and cotton blends, with medium speed and high spin.
For small loads (2-3 items) of lightly soiled garments needing a quick wash.
Adds a 15-minute prewash and drain for heavily soiled loads needing pretreatment.
Enhances stain removal by automatically setting water temperature to warm and then hot.
Increases energy savings on higher temperature cycles by slightly lengthening the wash time.
Adds an extra spin to improve drying time and reduce excess water for heavy fabrics.
Provides recommended wash water temperatures for different fabric types and soil levels.
Automatically senses and maintains uniform water temperature for consistent cleaning.
Tips for prolonging garment life, including detergent use, sorting, and loading.
Guidance on separating clothes by soil level, fabric type, color, and lint-producing properties.
Instructions for promptly removing clothes and checking the drum for small items.
Instructions for cleaning the exterior, interior, door seal, and removable dispenser drawer.
Recommendations for inspecting and replacing water inlet hoses to prevent failure.
Guidance on preparing the washer for non-use, winterizing, or moving to prevent damage.
Solutions for error codes like "FH", "F02", "SUD", and problems preventing the washer from starting.
Steps to diagnose and resolve issues related to water supply, wash/rinse functions, or unexpected stopping.
Solutions for issues with the drain hose, load balance, or the "SUD" routine affecting draining/spinning.
Addresses causes of noise, vibration, wet loads, dispenser issues, residue, and stains.
