Need help?Do you have a question about the Kenmore Ice Maker and is the answer not in the manual?
Details the limited warranty coverage and exclusions for the appliance.
Section to record model number, serial number, and purchase date for service.
Basic precautions to reduce the risk of fire, electric shock, or injury.
Instructions for removing packaging materials and handling the unit.
Guidance on cleaning the interior before initial operation.
Specifies ideal environmental and ventilation conditions for placement.
Explains the importance and method of grounding the appliance for safety.
Outlines the necessary water pressure and type for the ice maker.
Specific requirements for water pressure and flow from RO systems.
Step-by-step guide on how to level the ice maker for proper operation.
Detailed steps for connecting the cold water supply line to the ice maker.
Instructions on how to physically connect the copper tubing to the water pipe.
Guidelines for connecting the drain system according to codes and ordinances.
Specifics for gravity drain installation, including pipe diameter and drop.
Mentions drain pump system for some models.
Warning about electrical hazards and the need for proper connection.
Lists tools required for working with the ice maker door.
Instructions for removing the ice maker door.
Steps to reverse the door hinges for the opposite side.
Instructions for reattaching the door after modifications.
Steps to move the magnetic door catch to the other side.
Describes common sounds the ice maker may produce and their causes.
Explains the process of ice creation and storage in the unit.
How to activate normal and maximum ice production cycles.
Instructions on how to turn off the ice maker.
Procedures for cleaning exterior surfaces and the ice maker system.
Guidance on cleaning the outer casing and gaskets of the ice maker.
Steps for cleaning mineral buildup from the water system.
Importance of cleaning the condenser for efficient operation.
Detailed steps for cleaning the condenser fins and unit compartment.
Instructions for cleaning internal parts like the water pan and cutter grid.
Steps to properly shut down the unit for extended periods or moving.
Troubleshooting steps for when the ice maker will not operate.
Explains common sounds and their potential causes.
Diagnosing issues when the ice maker runs but produces no ice.
Troubleshooting steps for reduced ice production.
Solutions for problems with the cutter grid not functioning properly.
Addresses issues with ice taste, odor, color, or texture.
Notes on issues related to drain hose alignment and external plumbing.
Details about Sears' Master Protection Agreement for US customers.
Information on Sears Maintenance Agreements for Canadian customers.
To Next Page
General
