To Next PageTo Next Page
Need help?Do you have a question about the Kenmore OASIS 110.2807 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Color | White |
| Control Type | Electronic |
| Energy Star Certified | Yes |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Model | 110.2807 |
| Type | Washer |
| Width | 27.5 inches |
| Depth | 27 inches |
Details benefits and terms of Kenmore's extended service plan for product protection and maintenance.
Covers defects in material or workmanship for one year from purchase date, including free repair.
Covers defects in the stainless steel drum and plastic tub for ten years, with labor costs after the first year.
Provides crucial safety alerts and warnings to prevent injury or hazards during operation.
Lists necessary tools and parts for connecting drain hose, water inlet hoses, and securing the unit.
Guidelines for selecting a proper installation location to ensure performance and minimize noise/walk.
Details requirements for installing the washer with a wall or floor standpipe drain.
Crucial steps for safely grounding the washer to prevent electrical shock.
Steps for removing protective packaging to ensure proper operation and prevent damage.
Specifics on attaching hose couplings to the washer's hot and cold water inlet valves.
Guidance on attaching inlet hoses to the correct hot and cold water faucets at the wall.
Basic steps to begin operating the washing machine, including loading and selecting cycles.
Crucial guidance on using High Efficiency (HE) detergent for optimal cleaning and to prevent issues.
Instructions for performing a Clean Washer cycle monthly to maintain freshness and prevent odor.
Details common error codes like LF, Ld, UL, OL, 5d, Lid open, HC, dL, dU, and F##, and their likely causes.
Discusses general washer components and common operational issues related to them.
Discusses common causes of noise and vibration, including leveling, floor stability, and load balance.
Troubleshooting for common operational failures like not filling, rinsing, or agitating, and stopping mid-cycle.
Addresses problems where the washer continues to fill/drain or the cycle seems stuck, checking hose height and fit.
Troubleshooting for issues with draining or spinning, checking hose clogs, lid status, and sudsing.
Explains causes of excessive suds, emphasizing HE detergent use and proper measurement.
